User`s guide

176 Machine Settings
Sleep Mode.
Press OK.
About Deep Sleep Mode
If the machine is in Sleep Mode and does not receive any jobs for certain length of time, based on your model and
settings, the machine will automatically enter Deep Sleep Mode. You can set the length of time before the machine
enters Deep Sleep Mode between 10 to 60 minutes. The default time is 11 minutes.
• Deep Sleep Mode uses less power than Sleep Mode.
• The machine will wake up and start printing if it receives a print job.
Set Auto Power Off Mode
If the machine is in Deep Sleep Mode for certain length of time, based on your model and settings, the machine
will go into Power Off Mode automatically. The machine does not go into Power Off Mode when the machine is
connected to a wired or wireless network.
• To start printing, press
on the control panel and then send a print job.
NOTE: Select how long the machine must be in Deep Sleep Mode before it goes into Auto Power Off Mode.
1. Press p or q to select the General Setup option, and then press OK.
2. Press p or q to select the Ecology option, and then press OK.
3. Press p or q to select the Auto Power Off option, and then press OK.
4. Press p or q to select the Off , 1 hour , 2 hours , 4 hours , or 8 hours option, and then press OK.
Set Continue Mode
Turn on Continue Mode to force the machine to continue printing even if the control panel indicates that it is time
to replace the toner cartridge. When the Replace Toner error message is active, you cannot turn this mode on unless
you change the toner cartridge.
We recommend changing the toner cartridge as soon as possible. Print may appear faint when the Continue
Mode is On; we cannot guarantee print quality. The factory setting is Off.
1. Press p or q to select the General Setup option, and then press OK.
2. Press p or q to select the Replace Toner option, and then press OK.
3. Press p or q to select the Continue or Stop option.
Press OK.