User`s guide

178 Machine Settings
Machine Info.
Level 1 Level 2 Description
Print Settings -
Prints the Printer Settings page.
Print NetSetting -
Prints the Network Configuration Report.
Print WLANReport -
Prints the result of wireless LAN connectivity diagnosis.
Test Print -
Prints the test page.
Demo Print -
Prints the demonstration sheet.
Print Font -
Prints the font list.
Serial No. -
Displays the machine's serial number.
Version Main Version
Displays the main firmware version.
Sub1 Version
Displays the sub firmware version.
RAM Size
Displays the size of memory in this machine.
Page Count -
Displays the total printed pages.
Parts Life Toner Life
Displays the remaining life for toner cartridge.
Drum Life
Displays the remaining life for the drum unit.
Paper Tray
Level 1 Description
Manual Feed
Select whether to print from the Manual Feed Slot.
2-sided
Select whether to print on both sides of the paper.
Tray1 Size
Select the size of paper you loaded in the standard paper tray.
Check Size
Select whether to display the message telling you to check that the size of
the paper in the machine and the machine's Paper Size setting match.
General Setup
Level 1 Level 2 Description
Local Language -
Select the LCD language for your country.
Resolution -
Select a print resolution.
Density -
Increases or Decreases the print density.
Ecology Toner Save
Increases the page yield of the toner cartridge.
Sleep Time
Set the time to return to Power Saving Mode.
Quiet Mode
Decreases printing noise.
Auto Power Off
Sets the number of hours that the machine will remain in Deep Sleep Mode
before going into Power Off Mode.
Panel Control Button Repeat
Sets the time for the LCD message to change when holding p or q at
intervals.
Message Scroll
Sets the time in seconds that an LCD message will scroll across the LCD.
From Level 1=0.2 sec to Level 10=2.0 sec.
LCD Contrast
Adjusts the contrast of the LCD.
Auto Online
Sets the machine to return to Ready Mode after it has been idle for 30
seconds. If you select the setting to be Off , the machine cannot receive
print jobs while it has been left in Menu Mode.
Setting Lock -
Turns the lock panel settings by using the password.