User`s guide

181Machine Settings
Wi-Fi Direct Push Button
- You can easily configure your Wi-Fi Direct™ network settings
using the one-button push method.
PIN Code
- You can easily configure your Wi-Fi Direct™ network settings
using WPS with a PIN code.
Manual
- You can manually configure your Wi-Fi Direct™ network
settings.
Group Owner
- Sets your machine as the Group Owner.
Device Info.
Device Name You can see the device name of your machine.
SSID Displays SSID of Group Owner.
IP Address Displays the IP Address of your machine.
Status Info.
Status Displays the Wi-Fi Direct™ network status.
Signal Displays the current Wi-Fi Direct™ network signal strength.
When your machine acts as Group Owner, the LCD always
displays Strong.
Channel Displays the channel in use when the Status is G/O Active or
Client Active.
Speed Displays the connecting speed when the Status is G/O
Active or Client Active.
I/F Enable
- Enables or disables the Wi-Fi Direct™ connection.
Network Reset -
- Restores all network settings of the internal print server to the
factory settings.
*1 On connection to the network, if the machine's ‘Boot Method’ is ‘Auto’ the machine will attempt to set the IP
address and Subnet Mask from a boot server such as DHCP. If a boot server cannot be found, an APIPA IP address
will be allocated, such as 169. 254. [001-254]. [000-255]. If the ‘Boot Method’ of the machine is set to ‘Static’ you
must manually enter an IP address from the machine's control panel.
Reset Menu
Level 1 Description
Network
Restores all network settings of the internal print server to the factory
settings.
Factory Reset
Resets the machine and restores the printer settings (including command
settings) to the factory settings.