Owner`s manual

Installing the Hard Drive

1. Engage the hard-drive isolation cap to the hard drive.

2. Place the hard drive on its connector.

3. Place the hard-drive bracket on the hard drive and tighten the screws to secure the hard-drive

bracket in place.

4. Install:

a. base cover

b. battery

5. Follow the procedures in After Working Inside Your Computer.

Removing the Memory Module

1. Follow the procedures in Before Working Inside Your Computer.

2. Remove:

a. battery

b. base cover

3. Pry the retention clips away from the memory module until it pops up.

4. Lift up the memory module and remove it from the computer.