Owner`s manual

3. Perform the following steps:

a. Disconnect the coin-cell battery cable from the system board.

b. Pry and remove the coin-cell battery from the adhesive.

Installing the Coin-Cell Battery

1. Place the coin-cell battery on the system board with adhesive side downwards.

2. Connect the coin-cell battery cable to the system board.

3. Install:

a. base cover

b. battery

4. Follow the procedures in After Working Inside Your Computer.

Removing the Display Hinge

1. Follow the procedures in Before Working Inside Your Computer.

2. Remove:

a. battery

b. base cover

c. keyboard trim

d. keyboard