Owner`s manual

3. Perform the following steps:

a. Remove the LED cover.

b. Disconnect the status-light board cable and remove the screw that secures the status-light

board.

c. Lift and remove the status-light board from the computer.

Installing the Status-Light Board

1. Place the status-light board on its place on the computer.

2. Connect the status-light board cable to its connector.

3. Tighten the screw to secure the status-light board on the computer.

4. Place the LED cover on the status-light board.

5. Install:

a. speakers

b. system board

c. system fan

d. ExpressCard cage

e. palmrest

f. display hinge

g. WLAN card

h. hard drive

i. optical drive

j. memory

k. keyboard

l. keyboard trim

m. base cover

n. battery

o. SD card

6. Follow the procedures in After Working Inside Your Computer.