Owner`s manual
Table Of Contents
- Dell Latitude E6330 Owner's Manual
- Working on Your Computer
- Removing and Installing Components
- Recommended Tools
- Removing the Secure Digital (SD) Card
- Installing the Secure Digital (SD) Card
- Removing the ExpressCard
- Installing the ExpressCard
- Removing the Battery
- Installing the Battery
- Removing the Subscriber Identity Module (SIM) card
- Installing the SIM Card
- Removing the Hard Drive
- Installing the Hard Drive
- Removing the Optical Drive
- Installing the Optical Drive
- Removing the Base Cover
- Installing the Base Cover
- Removing the Keyboard Trim
- Installing the Keyboard Trim
- Removing the Keyboard
- Installing the Keyboard
- Removing the Wireless Local Area Network (WLAN) Card
- Installing the WLAN Card
- Removing the Bluetooth Module
- Installing the Bluetooth Module
- Removing the Memory
- Installing the Memory
- Removing the Coin-Cell Battery
- Installing the Coin-Cell Battery
- Removing the Palmrest
- Installing the Palmrest
- Removing the Media Board
- Installing the Media Board
- Removing the ExpressCard Cage
- Installing the ExpressCard Cage
- Removing the Speakers
- Installing the Speakers
- Removing the Display-Hinge Covers
- Installing the Display Hinge Covers
- Removing the Display Assembly
- Installing the Display Assembly
- Removing the System Board
- Installing the System Board
- Removing the Heat Sink
- Installing the Heat Sink
- Removing the Power Connector Port
- Installing the Power-Connector Port
- Removing the Input/Output (I/O) Board
- Installing the I/O Board
- Removing the Display Bezel
- Installing the Display Bezel
- Removing the Display Panel
- Installing the Display Panel
- Removing the Camera and Microphone Module
- Installing the Camera and Microphone Module
- Removing the LED Board
- Installing the LED Board
- Removing the Display-Hinge Walls
- Installing the Display-Hinge Walls
- Removing the Display Hinges
- Installing the Display Hinges
- Removing the LVDS and Camera Cable
- Installing the LVDS and Camera Cable
- Docking Port Information
- System Setup
- Diagnostics
- Technical Specifications
- Contacting Dell
Option Description
Hyper-Thread Control Allows you to enable or disable the
HyperThreading in the processor.
Default Setting: Enabled
Table 7. Power Management
Option Description
AC Behavior Allows the computer to power on automatically, when AC adapter is plugged. The
option is disabled.
• Wake on AC
Auto On Time Allows you to set the time at which the computer must turn on automatically. The
options are:
• Disabled (Default Setting)
• Every Day
• Weekdays
USB Wake Support Allows you to enable the USB devices to wake the computer from standby mode.
The option is disabled
• Enable USB Wake Support
Wireless Radio Control Allows you to control the WLAN and WWAN radio. The options are:
• Control WLAN radio
• Control WWAN radio
Default Setting: both the options are disabled.
Wake on LAN/WLAN This option allows the computer to power up from the off state when triggered by a
special LAN signal. Wake-up from the Standby state is unaffected by this setting
and must be enabled in the operating system. This feature only works when the
computer is connected to AC power supply.
• Disabled - Does not allow the system to power on by special LAN signals when
it receives a wake-up signal from the LAN or wireless LAN. (Default Setting)
• LAN Only - Allows the system to be powered on by special LAN signals.
• WLAN Only
• LAN or WLAN
Block Sleep Allows you to block the computer from entering into the sleep state. This option is
disabled by default.
• Block Sleep (S3)
Primary Battery Configuration Allows you to define how to use the battery charge, when AC is plugged in. The
options are:
• Adaptive (Default Setting)
• Standard Charge
• Express Charge
• Primarily AC use
67