Laptop User Manual


5. Remove the M3 x 3-mm screw on the hard drive bezel.

6. Remove the hard drive bezel.

7. Remove the two M2.5 x 5-mm screws from the cover of the hard drive carrier.

8. Lift the cover up at an angle and slide the tabs on the cover out from the carrier.

9. Lift the hard drive up an angle and slide it out from the connector on the hard drive carrier.
1
hard drive
2
bottom of base assembly
3
M3 x 3-mm screws (2)


1
hard drive bezel
2
pin on bezel bracket
3
hard drive
4
M3 x 3-mm screw
1
M2.5 x 5-mm screws (2)
2
cover
3
tabs (2)
4
hard drive carrier