Laptop User Manual

Back to Contents Page

 Hinge Covers

Dell™Latitude™E6400andE6400ATGand

MobileWorkstationPrecision™M2400ServiceManual

Removing the Hinge Covers

Replacing the Hinge Covers

Removing the Hinge Covers



The hinge covers are not interchangeable; the left one covers the DisplayPort connector and the right one covers the RJ-45 network connector.



1. Follow the procedures in Before Working on Your Computer.



2. Remove the bottom of the base assembly (see Removing the Bottom of the Base Assembly).



3. Remove the M2.5 x 5-mm screw from each hinge cover.



4. Slide each hinge cover forward and lift to remove it.

Replacing the Hinge Covers



1. Slide the left hinge cover over the DisplayPort connector and slide the right hinge cover over the RJ-45 network connector.



2. Replace the M2.5x5-mm screw in each hinge cover.



3. Replace the bottom of the base assembly (see Replacing the Bottom of the Base Assembly).



4. Follow the procedures in After Working on Your Computer.

Back to Contents Page



CAUTION: Before you begin any of the procedures in this section, follow the safety instructions that shipped with your computer.

M2.5 x 5-mm screws (2)

hinge covers