Manualshelf

Service Manual

ManualsBrandsDell ManualsAlienwareEdge Gateway 3000 Series OEM Ready
11121314151617181920
4
Replacing the front cover
WARNING: Before working inside your Edge Gateway, read the safety information that shipped with your Edge Gateway and follow
the steps in Before working inside your Edge Gateway. After working inside your Edge Gateway, follow the steps in After working
inside your Edge Gateway.
Procedure
1. Place the front cover into the slots on the system base.
NOTE: Note the orientation of the front cover. Align the notch on the front cover with the slots on the system base and place the
front cover.
2. Turn the system over.
3. Replace the four screws (M3x18) that secure the front cover to the system base.
13