Manualshelf

Service Manual

ManualsBrandsDell ManualsAlienwareEdge Gateway 3000 Series OEM Ready
21222324252627282930
18
Replacing the status-light lens
WARNING: Before working inside your Edge Gateway, read the safety information that shipped with your Edge Gateway and follow
the steps in Before working inside your Edge Gateway. After working inside your Edge Gateway, follow the steps in After working
inside your Edge Gateway.
Procedure
1. Place the status-light lens on the rubber gasket.
2. Slide the left-I/O cover to the system base.
Post-requisites
1. Replace the left-I/O bracket.
2. Replace the antenna-cable bracket.
3. Replace the front cover.
29