Manualshelf

Service Manual

ManualsBrandsDell ManualsAlienwareEdge Gateway 3000 Series OEM Ready
21222324252627282930
19
Removing the right-I/O bracket
WARNING: Before working inside your Edge Gateway, read the safety information that shipped with your Edge Gateway and follow
the steps in Before working inside your Edge Gateway. After working inside your Edge Gateway, follow the steps in After working
inside your Edge Gateway.
Prerequisites
1. Remove the top cover.
2. Remove the antenna-cable bracket.
3. Remove the right-I/O cover.
Procedure
1. Remove the screw (M3x10) that secures the right-I/O bracket to the system board.
2. Slide and release the tabs on the right-I/O bracket from the system board.
3. Lift the right-I/O bracket off the system board.
30