Manualshelf

Service Manual

ManualsBrandsDell ManualsAlienwareEdge Gateway 3000 Series OEM Ready
31323334353637383940
21
Removing the ZigBee cable
WARNING: Before working inside your Edge Gateway, read the safety information that shipped with your Edge Gateway and follow
the steps in Before working inside your Edge Gateway. After working inside your Edge Gateway, follow the steps in After working
inside your Edge Gateway.
Prerequisites
NOTE: Depending on the configuration ordered, the ZigBee antenna and cable may not be available.
1. Remove the front cover.
2. Remove the antenna-cable bracket.
3. Remove the right-I/O cover.
4. Remove the right-I/O bracket.
Procedure
Remove the ZigBee cable from the system board.
32