Manualshelf

Service Manual

ManualsBrandsDell ManualsAlienwareEdge Gateway 3000 Series OEM Ready
41424344454647484950
30
Replacing the left-rubber gasket
WARNING: Before working inside your Edge Gateway, read the safety information that shipped with your Edge Gateway and follow
the steps in Before working inside your Edge Gateway. After working inside your Edge Gateway, follow the steps in After working
inside your Edge Gateway.
Procedure
1. Slide the ports on the system board into the slots on the left-rubber gasket.
2. Place the left-rubber gasket on the system board.
3. Slide the left-I/O cover to the system base.
Post-requisites
1. Replace the status-light lens.
2. Replace the left-I/O bracket.
3. Replace the coin-cell battery.
4. Replace the antenna-cable bracket.
5. Replace the front cover.
43