Manualshelf

Service Manual

ManualsBrandsDell ManualsAlienwareEdge Gateway 3000 Series OEM Ready
41424344454647484950
34
Replacing the WLAN bracket
WARNING: Before working inside your Edge Gateway, read the safety information that shipped with your Edge Gateway and follow
the steps in Before working inside your Edge Gateway. After working inside your Edge Gateway, follow the steps in After working
inside your Edge Gateway.
Procedure
1. Align and place the WLAN bracket on the system board.
2. Turn the system board over.
3. Align and place the system board on the system base.
4. Slide the left-I/O cover to the system base.
Post-requisites
1. Replace the left-I/O bracket.
2. Replace the right-I/O bracket.
3. Replace the right-I/O cover.
4. Replace the coin-cell battery.
5. Replace the antenna-cable bracket.
6. Replace the front cover.
49