Service Manual

Removing the left-I/O cover

WARNING: Before working inside your Edge Gateway, read the safety information that shipped with your Edge Gateway and follow

the steps in Before working inside your Edge Gateway. After working inside your Edge Gateway, follow the steps in After working

inside your Edge Gateway.

Prerequisites

1. Remove the front cover.

2. Remove the antenna-cable bracket.

3. Remove the WLAN cable.

4. Remove the coin-cell battery.

5. Remove the right-I/O cover.

6. Remove the right-I/O bracket.

7. Remove the left-I/O bracket.

8. Remove the ZigBee cable.

9. Remove the right-rubber gasket.

10. Remove the status-light lens.

11. Remove the left-rubber gasket.

12. Remove the system board.

Procedure

1. Remove the dust caps on the left-I/O ports.

2. Slide the left-I/O cover away from the system base.