Service Manual

Replacing the left-I/O cover

WARNING: Before working inside your Edge Gateway, read the safety information that shipped with your Edge Gateway and follow

the steps in Before working inside your Edge Gateway. After working inside your Edge Gateway, follow the steps in After working

inside your Edge Gateway.

Procedure

1. Insert the tab on the left-I/O cover to the slot on the system base.

2. Slide the left-I/O cover onto the system base at an angle and snap it into place.

3. Replace the dust caps to the left-I/O ports.

Post-requisites

1. Replace the system board.

2. Replace the left-rubber gasket.

3. Replace the status-light lens.

4. Replace the right-rubber gasket.

5. Replace the ZigBee cable.

6. Replace the left-I/O bracket.

7. Replace the right-I/O bracket.

8. Replace the right-I/O cover.

9. Replace the coin-cell battery.

10. Replace the WLAN cable.

11. Replace the antenna-cable bracket.

12. Replace the front cover.