Users Guide

GtYaoevIodhTgHDyFWczWtYkEhDYROpX0pf27K62TtTOVooUwRuQ)IgBB7ECznCP

Use the above token in the Snapweb interface to be granted access.

admin@localhost:~$

5. Paste the token on the web page and click Submit.

You can now access the snapweb.

CAN module

NOTE: For information about using the CAN module, see the documentation available at www.atmel.com.

The Edge Gateway supports the CANbus model Atmel ATSAME70N19A-CNT. This feature is only supported if the hardware module is

present, and the operating system provides the capability of mutual communication between user space application and physical module.

If there is a specific CANbus programming requirement of user mode application, contact the hardware provider of that module for the API

documentation.

To check if the CAN module is present:

for i in /dev/ttyACM*; do udevadm info $i | grep -q 03eb_2404_USB_CAN_FD && echo "path:

/dev/$(basename $i)"; done

Sensors

The sensors on the Edge Gateway provide measurements on pressure, relative humidity and temperature, and motion.

Table 11. Sensor types

Relative humidity and temperature sensor ST Micro HTS221

Motion sensor—Accelerometer ST Micro LNG2DMTR