Users Guide

Function Indicator Color Control Status
On (Green): High-speed
connection (100 Mbps)
On (Amber): Low-speed
connection (10 Mbps)
Activity Green Driver (LAN) Off: No activity on link
Blinking Green: LAN
activity. The blink rate is
related to packet density.
NOTE: The power and system status light may operate differently during different boot-up scenarios, for example, when a USB script
file is run during boot-up.
Table 5. Power connector pin definition details
Pin Signal Function
1 DC+ 12–57 VDC power
2 DC– Ground
3 IG 9–32 VDC ignition
NOTE: Pin 3 (IG) is connected to the vehicle's ignition status indicator (optional) or a wake pin. A voltage of more than 9 V on the
signal indicates that the vehicle’s engine is running. The Ignition or Wake pin is used to prevent the draining of the vehicle battery
when the vehicle is turned off for an extended amount of time.
NOTE: The IG signal can be used to gracefully shutdown or enter low-power state when the vehicle is turned off (battery powered).
It can also be used for powering on the Edge Gateway when the vehicle starts.
Right view
9