Users Guide
Manuals
Brands
Dell Manuals
Converged Infrastructure
Edge Gateway 3000 Series
41
42
43
44
45
46
47
48
49
50
Table Of Contents
Dell Edge Gateway 3001 安装和操作手册
概览
系统视图
顶部视图
底部视图
左侧视图
右侧视图
安装 Edge Gateway
安全与管制信息
设置 Edge Gateway
激活移动宽带服务
安装 边缘网关
使用标准安装架安装 Edge Gateway
使用快速安装架安装 Edge Gateway
将电缆控制条连接至标准安装架
使用 DIN 导轨架将 Edge Gateway 安装在 DIN 导轨上。
使用垂直安装架安装 Edge Gateway
使用 VESA 安装架安装 Edge Gateway
设置 ZigBee 加密解密器
设置操作系统
Windows 10 IoT Enterprise LTSB 2016
启动并登录 — 远程系统配置
恢复 Windows 10 IoT Enterprise LTSB 2016
前提条件
步骤
Windows 10 IOT Enterprise LTSB 2016 基本功能
Ubuntu Core 16
概览
设置 Ubuntu Core 16 的前提条件
启动并登录 - 远程系统配置
更新操作系统和应用程序
查看操作系统和应用程序版本
附加的 Ubuntu 命令
Ubuntu 网络管理器
串行端口
Minicom
GPIO
安全性
Watchdog Timer (WDT)
云 LED 开/关
全球定位系统 (GPS)
Snappy 自动更新/自动试运行
访问 Snappy Store/Snapweb
传感器
点火针
系统电源管理
恢复 Ubuntu Core 16
选项 1:从操作系统还原
选项 2:系统开机自检期间还原
从 USB 闪存驱动器还原 Ubuntu Core 16
刷新新的 OS 映像
刷新新的 Ubuntu OS 映像
Ubuntu Server
概览
使用以太网端口 1 登录 Edge Gateway
安装或配置动态主机配置协议 (DHCP) 守护程序
Ubuntu Server 驱动程序信息
Ubuntu Server 上的固件管理
Ubuntu Server 固件更新 — 在线方法
Ubuntu Server 固件更新 - 手动方法
配置监督程序计时器 (WDT)
配置监督程序计时器 (WDT)
通过 sysfs 接口读取状态
可信平台模块 (TPM)
激活 Dell Command | Configure 中的 TPM
云 LED 开/关
高级 Linux 声音架构 (ALSA)
全球定位系统 (GPS)
串行端口
GPIO
ADC/DAC 模式
传感器
点火针
系统电源管理
Ubuntu Network Manager
还原 Ubuntu Server
创建恢复 OS 恢复 USB 闪存盘
访问和更新 BIOS
访问 BIOS 设置
更新 BIOS
使用 USB 调用脚本
从 USB 闪存驱动器刷新 BIOS
在 Windows 系统上更新 BIOS
在 Ubuntu 系统上使用 UEFI 压缩包更新
Dell Command | Configure (DCC)
Edge Device Manager (EDM)
默认 BIOS 设置
参考资料
附录
天线规格
从 DIN 导轨架卸下
连接到 Edge Gateway
Windows 10 IoT Enterprise LTSB 2016
启动并登录 — 远程系统配置
启动和登录 — 静态 IP 系统配置
Ubuntu Core 16
启动并登录 — 直接系统配置
启动并登录 — 静态 IP 系统配置
联系 Dell
3.
将
DIN
轨道安装架上的螺钉孔与垂直安装架上的螺钉孔对齐
,
然后拧紧两颗螺钉。
注
:
以
8±0.5
千克
-
厘米
(
17.64±1.1
磅
-
英寸
)
的力矩拧紧螺钉。
42
安装
Edge Gateway
1
...
...
40
41
42
43
44
...
...
97