Users Guide
Table Of Contents
- Dell Edge Gateway 3001 安装和操作手册
- 概览
- 系统视图
- 安装 Edge Gateway
- 设置 ZigBee 加密解密器
- 设置操作系统
- 访问和更新 BIOS
- 参考资料
- 附录
- 联系 Dell
注: 有关蓝牙配对的更多信息,请参阅 https://blog.bluetooth.com/bluetooth-pairing-part-4。
[bluetooth]# agent on
[bluetooth]# default-agent
[bluetooth]# pairable on
[bluetooth]# pair XX:XX:XX:XX:XX:XX <MAC Address of Device to Pair>
[bluetooth]# connect XX:XX:XX:XX:XX:XX [CHG] Device XX:XX:XX:XX:XX:XX Connected: yes
[bluetooth]# exit
4. 配置 SPP。
服务器设备
$ bluez.sdptool add --channel=22 SP
$ ./rfcomm -r listen /dev/rfcomm0 22
Waiting for connection on channel 22
Connection from XX:XX:XX:XX:XX:XX to /dev/rfcomm0 <These lines will be seen when client
comes>
Press CTRL-C for hangup
然后,创建新的终端实例,以屏蔽蓝牙串行上的数据。
$ cat /dev/rfcomm0
客户端设备
$ bluez.sdptool add --channel=22 SP
$ ./rfcomm -r connect /dev/rfcomm0 YY:YY:YY:YY:YY:YY 22
然后,创建新的终端实例以发送数据,例如,新的 ssh 实例。
$ echo "test" > /dev/rfcomm0
注: rfcomm 命令在此命令中不可用。如果需要,您可以将二进制文件从运行 Ubuntu 16.04 或更高版本且基于 AMD64 的系统
复制到 Edge Gateway。
串行端口
默认情况下,RS-232、RS-422 和 RS-485 的 LED 状态是 OFF(关)。仅当传输数据时它才是 ON(开)。设备节点从最左边端口
(RS-232) 开始按端口位置排序。
表. 14: 串行端口
编号 端口类型 设备节点 制造商部件号
1 RS-232
RS-422
RS-485
COM3 JVE Global
23N6963-10D00B-15G-2.9
http://www.jve.com.cn/
注: 此部件号仅供参考,可
能随时更改。
2 RS-232
RS-422
RS-485
COM3 JVE Global
23N6963-10D00B-15G-2.9
http://www.jve.com.cn/
注: 此部件号仅供参考,可
能随时更改。
RS-232
无法从 Dell 使用就绪软件控制或管理设备。
要配置 RS-232 端口,请运行以下命令:
设置操作系统
55