Service Manual

19
Replacing the DIP switch board
WARNING: Before working inside your computer, read the safety information that shipped with your computer and follow
the steps in Before working inside your computer. After working inside your computer, follow the instructions in After
working inside your computer. For more safety best practices, see the Regulatory Compliance home page at
www.dell.com/regulatory_compliance.
Procedure
1. Place the DIP switch board on the metal frame.
2. Replace the screws that secure the DIP switch board to the metal frame.
3. Place the DIP switch board on the status-light board.
4. Replace the screws that secure the DIP switch board assembly to the status-light board.
Post-requisites
1. Replace the base frame.
2. Replace the mobile broadband card.
3. Replace the wireless card.
4. Replace the top cover.
30