Service Manual

21
Replacing the status-light board
WARNING: Before working inside your computer, read the safety information that shipped with your computer and follow
the steps in Before working inside your computer. After working inside your computer, follow the instructions in After
working inside your computer. For more safety best practices, see the Regulatory Compliance home page at
www.dell.com/regulatory_compliance.
Procedure
1. Place the status-light board on the base frame.
2. Replace the screws that secure the status-light board to the base frame.
Post-requisites
1. Replace the DIP switch board.
2. Replace the base frame.
3. Replace the mobile broadband card.
4. Replace the wireless card.
5. Replace the top cover.
32