Service Manual

Removing the memory module

OPOMBA Before working inside your Embedded Box PC, read the safety information that shipped with your Embedded

Box PC and follow the steps in Before working inside your Embedded Box PC. After working inside your Embedded Box

PC, follow the steps in After working inside your Embedded Box PC. For more safety best practices, see the Regulatory

Compliance home page at www.dell.com/regulatory_compliance.

Teme:

• Prerequisites

• Procedure

Prerequisites

1. Follow step 1 to step 6 in “Removing the back cover”.

2. Remove the PCI/PCIe card (if installed).

Procedure

1. Use your fingertips to carefully spread apart the securing-clips on each end of the memory-module slot until the memory module pops

up.

2. Remove the memory module from the memory-module slot.

a. memory module

b. memory-module slot

Removing the memory module 33