Service Manual

Skica 2. DIP switch settings with other riser cards

1. DIP switch

2. CPU board

1. Align the screw holes on the bracket with the screw holes on the riser card.

2. Replace the screws that secure the bracket with the riser card.

3. Insert the riser-card assembly in the riser-card slot.

4. Replace the screws that secure the riser-card assembly to the chassis.

Post-requisites

1. Replace the PCI/PCIe card (if necessary).

2. Follow step 2 to step 8 in “Replacing the back cover”.

Replacing the riser card