Users Guide

Configuring LAN/WLAN network

1. Click the Start icon then search for Network.

2. Open Network and Sharing Center.

3. Click Change adapter settings on the left panel.

to configure the LAN on the Embedded Box PC.

Configuring Bluetooth

1. Click the Start icon then search for Bluetooth.

2. Click Change Bluetooth settings.

Configuring WWAN (DW5580) network

NOTE: For instruction on installing the WWAN card and SIM card, see the

Service manual

for your system at

www.dell.com/support. After installing the WWAN module and SIM card:

1. Click the Start icon then search for Network.

2. Open Network and Sharing Center.

3. Click Change adapter settings on the left panel.

4. Locate the WWAN connection and select the entry to connect (or disconnect) to the WWAN module.

Common port mappings

Serial port mapping

The table lists the serial port mapping on the Embedded Box PC 5000, with the Dell factory installed Windows Embedded Standard 7 P/E

OS.

Table 3. Serial port mapping

Serial port number Port type Connector Device Node

1 RS232/422/485 DB9 COM1

2 RS232/422/485 DB9 COM2

3 RS232/422/485 DB9 COM3

4 RS232/422/485 DB9 COM4

Embedded Box PC 5000 GPIO In/Out mapping

The GPIOs ports on the Embedded Box PC and Nuvoton NCT6793D uses index/data pair of processor I/O Addresses 2Eh/2Fh to access

NCT6793D.

GPIO 8 Out pin# to NCT6793D pin# map:

0 to 121 (GP00)

1 to 122 (GP01)

2 to 123 (GP02)

3 to 2 (GP03)

4 to 3 (GP04)

5 to 4 (GP05)

6 to 5 (GP06)

7 to 6 (GP07)

8 is GND

GPIO 8 In pin# to NCT6793D pin# map:

0 to 50 (GP60)

1 to 49 (GP61)

Setting up your operating system