Users Guide

Serial port number Port type Connector Device Node

2 RS232/422/485 DB9 COM2

3 RS232/422/485 DB9 COM3

4 RS232/422/485 DB9 COM4

Embedded Box PC 5000 GPIO In/Out mapping

The GPIOs ports on the Embedded Box PC and Nuvoton NCT6793D uses index/data pair of processor I/O Addresses 2Eh/2Fh to access

NCT6793D.

GPIO 8 Out pin# to NCT6793D pin# map:

0 to 121 (GP00)

1 to 122 (GP01)

2 to 123 (GP02)

3 to 2 (GP03)

4 to 3 (GP04)

5 to 4 (GP05)

6 to 5 (GP06)

7 to 6 (GP07)

8 is GND

GPIO 8 In pin# to NCT6793D pin# map:

0 to 50 (GP60)

1 to 49 (GP61)

2 to 48 (GP02)

3 to 47 (GP63)

4 to 45 (GP64)

5 to 44 (GP65)

6 to 43 (GP66)

7 to 42 (GP67)

8 is GND

Embedded Box PC 5000 IO Module PCIe expansion mapping

The PCIe slots on the Embedded Box PC are driven directly from the host PCIe bus. Since it is a generic PCIe expansion, there are no

PCIe device-specific drivers integrated into the Windows 10 IoT Enterprise LTSB 2015 OS image. If there is a specific PCIe card used on

this slot, contact the Vendor of that PCIe card to verify if they have Windows 10 IoT Enterprise LTSB 2015 drivers.

Recommended drivers and applications for Embedded Box

Dell recommends installing the drivers and applications required for the Embedded Box PC from www.dell.com/support in the following

sequence:

1. Intel Mobile Chipset Software Installation Utility

2. Critical Microsoft Quick Fix Engineering (QFE)

3. Intel Rapid Storage Technology

4. Graphics

5. Intel Management Technology

6. Audio

7. Integrated wired Network Adapter

8. Wireless Local Network Adapters and Bluetooth

Setting up your operating system