Users Guide

23. Psychrometric chart showing recommended and allowable operating environments for the tape
library..........................................................................................................................................................25
24. Types of receptacles.................................................................................................................................31
25. Removing the module from the box......................................................................................................... 37
26. The module after removal from the box...................................................................................................37
27. Unlatching the top of the module.............................................................................................................38
28. Removing the top of the module.............................................................................................................. 38
29. The module is opened to show the foam packing................................................................................... 39
30. The foam packing is removed, and the internal components are shown - Base Module.......................39
31. Lowering the front of the top cover.......................................................................................................... 41
32. Unlocking the spring loaded lock............................................................................................................. 42
33. Removing the cover.................................................................................................................................. 42
34. Lifting the cover and locking it..................................................................................................................43
35. Universal rack connector.......................................................................................................................... 43
36. Incorrect connector locations ................................................................................................................. 44
37. Correct connector locations .....................................................................................................................44
38. Mounting the rails to the connectors........................................................................................................45
39. Side rails installed.....................................................................................................................................46
40. Sliding the library into the rack.................................................................................................................46
41. Library in the rack......................................................................................................................................47
42. Hole for alignment pin...............................................................................................................................48
43. Alignment lever lock................................................................................................................................. 48
44. Alignment lever locked or engaged to lower module.............................................................................. 49
45. Alignment lever unlocked or disengaged.................................................................................................49
46. Two modules in rack, seen from the rear.................................................................................................50
47. Connected modules.................................................................................................................................. 50
x