Users Guide

Table 35. Warning events (continued)
Event Code Message Text and Description Details and Solution
4074 Medium source element empty. Check the source slot visually and rescan the
inventory. Additionally, check for valid and
readable bar code label.
4075 Cartridge lost while it was extracted from
slot/drive.
Check the source/destination element and
ensure that no obstructions are in the pathway
of the accessor.
4077 Unlocking the right magazine failed.
• Check if any obstacle is preventing the robot
from movement.
• Restart the library and retry the operation.
• If the error persists, replace the chassis.
• If the magazine needs to be removed to get
access to the tape cartridges, rst power
down the device, and then release the
magazine manually. Only one magazine can
be open at a time.
4078 Unlocking the left magazine failed.
• Check if any obstacle is preventing the robot
from movement.
• Restart the library and retry the operation.
• If the error persists, replace the chassis.
• If the magazine needs to be removed to get
access to the tape cartridges, rst power
down the device, and then release the
magazine manually. Only one magazine can
be open at a time.
4079 Unlocking the I/O station failed.
• Restart the library and retry the operation.
• If the error persists, replace the chassis.
• If the I/O station needs to be removed to get
access to the tape cartridges, rst power
down the device, and then release the
magazine manually. Only one magazine can
be open at a time.
4080 Library Verify test failed with warning. An unidentied failure occurred. Contact your
service representative.
4085 Drive command retries expired.
• Run a drive read/write test (Library > Actions
> Tests > Drive test) with a known working
cartridge.
• If the drive test is successful, check in the
host for errors that are related with the
retries.
• If the drive test failed, replace the drive.
Chapter 5. Troubleshooting 95