Users Guide

Table 35. Warning events (continued)
Event Code Message Text and Description Details and Solution
4086 Move operation failed.
• Ensure that the network the library is
connected to is operating normally.
• Ensure that the library is running the current
rmware.
• Restart the library.
4089 Auto calibration of one or more modules
failed. Adjustment to calibration target
failed.
• The library must be re-calibrated.
• Ensure that the library rmware is up-to-
date.
• This event indicates that one or more of the
gray calibration targets on the library
magazines couldn’t be used in calibration.
• Inspect the calibration targets in each
module and then repeat the auto-calibration
routine with the Management GUI.
4090 Auto calibration of one or more modules
failed. Calibration target not found.
• The library must be re-calibrated.
• Ensure that the library rmware is up-to-
date.
• This event indicates that one or more of the
gray calibration targets on the library
magazines could not be used in calibration.
• Inspect the calibration targets in each
module and then repeat the auto-calibration
routine with the Management GUI.
4091 Auto calibration of one or more modules
failed. Adjustment out of range.
• The library must be re-calibrated.
• Ensure that the library rmware is up-to-
date.
• This event indicates that one or more of the
gray calibration targets on the library
magazines could not be used in calibration.
• Inspect the calibration targets in each
module and then repeat the auto-calibration
routine with the Management GUI.
4093 Could not obtain an IP address from DHCP
server.
• Check the network conguration settings and
check if the DHCP server is reachable.
• Use the network conguration menu or
unplug the network cable and plug it in after a
few seconds to trigger an automatic
reconguration of the network interface.
4095 Library test failed. Not enough valid
cartridges available for testing.
Load the cartridges into the library.
4098 System time synchronization with SNTP
failed.
Check for valid SNTP server address in Time
conguration. If correct, ensure that the server
is reachable from your network and not
blocked by a rewall.
96 Dell EMC ML3 Tape Library: User's Guide