Users Guide

Parameter
Code Flag name Type Description
13d Library Pick
Retry
W There is a potential problem with the drive ejecting cartridges or with
the library picking cartridges from a slot.
No action needs to be taken at this time.
If the problem persists, contact Technical Support.
14d Library Place
Retry
W There is a potential problem with the library mechanism placing a
cartridge into a slot.
No action needs to be taken at this time.
If the problem persists, contact Technical Support.
15d Library Load
Retry
W There is a potential problem with the drive or the library mechanism
loading cartridges, or an incompatible cartridge.
This flag is cleared when the next move command is received.
16d Library Door C The operation failed because the library door is open.
Clear any obstructions from the library door.
Close the library door.
If the problem persists, call the library supplier help line.
17d Library I/O
Station
C There is a mechanical problem with the library media I/O Station.
19d Library
Security
W Library security is compromised. The door was opened then closed
during operation.
20d Library
Security
Mode
I The library security mode was changed. The library was either put into
secure mode, or the library exited the secure mode. This is for
information purposes only. No action is required.
21d Library
Offline
I The library was manually turned offline and is unavailable for use.
22d Library Drive
Offline
I A drive inside the library was taken offline. This is for information
purposes only. No action is required.
24d Library
Inventory
C The library detected an inconsistency in its inventory.
Redo the library inventory to correct inconsistency.
Restart the operation.
28d Power
Supply
W A redundant power supply failed inside the library. Check the library
users manual for instructions on replacing the failed power supply.
33d Library
Capacity
Exceeded
C The total number of volumes exceeds the available number of storage
elements. Remove a cartridge from the inventory to recover.
I = Informational suggestion to user
W = Warning. Remedial action is advised. Performance of data might be at risk.
C = Critical immediate remedial action is required.
106 Dell EMC ML3 Tape Library: User's Guide