Users Guide

Chapter 6. Upgrading and servicing

In this section, you can follow the procedures to add, remove, and replace library components.

Recommended tools

• #2 Phillips screwdriver

• Small Flat Head or Torx screwdriver

Identifying a failed component

Check which module contains the failed component. See “Identifying a failed component” on page 75.

Internal view of library

Figure 57. Internal view of the library

Table 40. Internal view description

Numb

Item Description

1 Right cartridge

magazine

If the module is on the bottom, the right cartridge magazine holds 16

cartridges; if anywhere else in the library, it can hold 20 cartridges.

2 Left cartridge magazine If the module is on the bottom, the left cartridge magazine holds 16

cartridges; if anywhere else in the library, it can hold 20 cartridges.

3 Accessor This component contains the library accessor and bar code reader. The

accessor moves cartridges to and from the

• I/O station

• Storage slots

• Tape drive