Install Guide

About this guide
This guide provides site preparation recommendations, step-by-step procedures for rack mounting and desk mounting, inserting modules,
and connecting to a power source.
CAUTION: To avoid electrostatic discharge (ESD) damage, wear grounding wrist straps when handling this equipment.
WARNING: Only trained and qualied personnel can install this equipment. Read this guide before you install and power up this
equipment. This equipment contains two power cords. Disconnect both power cords before servicing.
WARNING: This equipment contains optical transceivers, which comply with the limits of Class 1 laser radiation.
Figure 1. Class 1 laser product tag
WARNING: When no cable is connected, visible and invisible laser radiation may be emitted from the aperture of the optical
transceiver ports. Avoid exposure to laser radiation and do not stare into open apertures.
Topics:
• Support hardware and software
• Document conventions
• Document feedback
Support hardware and software
This document is applicable for the following Fibre Channel (FC) switch modules:
Table 1. FC switch modules
Blade Server FC switch module Mini-Mezz HBAs Supported Dell EMC chassis Required OS version
Dell EMC MXG610s FC switch
Emulex LPm31002-D
Emulex LPm32002-D
QLogic QME2692-DEL
QLogic QME2742-DEL
Dell EMC PowerEdge MX7000 Brocade fabric OS 8.1.0_Inx
The following table lists the models of this switch module supported and available for use with the Dell EMC PowerEdge MX7000 chassis:
1
About this guide 5