Setup Guide

LED Description
• Blinking blue—Module is being
identied.
FC port status LED
• Both o—No light or signal carrier—no
module, no cable—for the media
interface
• Solid amber—Receiving light or signal
carrier, but not yet online
• Slow ashing amber, 2-second intervals
—Disabled; results of diagnostics or the
portdisable command.
• Fast ashing amber, 1/2-second
intervals—Error occurred, fault with
port.
• Solid green—Online; connected with
external device over cable
• Slow ashing green, 2-second intervals
—Online but segmented; Loopback
cable or incompatible switch.
• Fast ashing green, 1/2-second intervals
—Internal loopback, diagnostic.
• Flickering green—Online and frames
owing through the port.
Additional country-specic IEEE notices
Figure 12. Croatia
14
MXG610s Setup Guide