Users Guide

Syntax
show unit-provision
Parameters None
Command Mode EXEC
Usage Information If the Fabric Switching Engine is in Full Switch mode, you must manually congure the unit ID of an attached Fabric
Expander (see Virtual ports). Use the show unit-provision command to display the assigned and
unassigned unit IDs, and service tag (provision name) values. Use the unit-provision command to congure
the Fabric Expander with an unassigned unit ID and provision name.
Example
OS10# show unit-provision
Node ID | Unit ID | Provision Name | Discovered Name | State |
--------+---------+----------------+-----------------+-------|
1 | 71 | | | |
1 | 72 | | | |
1 | 73 | | | |
1 | 74 | | | |
1 | 75 | | | |
1 | 76 | | | |
1 | 77 | | | |
1 | 78 | 403RPK2 | 403RPK2 | up |
1 | 79 | | | |
1 | 80 | | | |
1 | 81 | | | |
1 | 82 | | | |
Supported Releases 10.4.0E(R3S) or later
show vlan
Displays the current VLAN conguration.
Syntax
show vlan [vlan-id]
Parameters vlan-id — (Optional) Enter a VLAN ID (1 to 4093).
Default Not congured
Command Mode EXEC
Usage Information None
Example
OS10# show vlan
Codes: * - Default VLAN, M - Management VLAN, R - Remote Port Mirroring VLANs
Q: A - Access (Untagged), T - Tagged
NUM Status Description Q Ports
1 down
Supported Releases 10.2.0E or later
shutdown
Disables an interface.
Syntax
shutdown
Parameters None
Default Disabled
Interfaces 127