Users Guide

clear ip ospf process
Clears all OSPF routing tables.
Syntax
clear ip ospf {instance-number} process
Parameters instance-number — Enter an OSPF instance number (1 to 65535).
Default Not congured
Command Mode EXEC
Usage Information This command clears all entries in the OSPF routing table.
Example
OS10# clear ip ospf 3 process
Supported Releases 10.2.0E or later
clear ip ospf statistics
Clears OSPF trac statistics.
Syntax
clear ip ospf [instance-number] statistics
Parameters instance-number — (Optional) Enter an OSPF instance number (1 to 65535).
Default Not congured
Command Mode EXEC
Usage Information This command clears the OSPF trac statistics in a specied instance or in all the congured OSPF instances, and
resets them to zero.
Example
OS10# clear ip ospf 10 statistics
Supported Releases 10.4.0E(R1) or later
default-information originate
Generates and distributes a default external route information to the OSPF routing domain.
Syntax
default-information originate [always]
Parameters always — (Optional) Always advertise the default route.
Defaults Disabled
Command Mode ROUTER-OSPF
Usage Information The no version of this command disables the distribution of default route.
Example
OS10(config)# router ospf 10
OS10(config-router-ospf-10)# default-information originate always
Supported Releases 10.3.0E or later
default-metric
Assigns a metric value to redistributed routes for the OSPF process.
Syntax
default-metric number
372 Layer 3