Users Guide
• address2...address8 — (Optional) Enter up to eight DNS server addresses, in order of preference.
Default Not congured
Command Mode DHCP-POOL
Usage Information None
Example
OS10(conf-dhcp-Dell)# dns-server 192.168.1.1
Supported Releases 10.2.0E or later
domain-name
Congures the name of the domain where the device is located.
Syntax
domain-name domain-name
Parameters domain-name — Enter the name of the domain (up to 32 characters).
Default Not congured
Command Mode DHCP-POOL
Usage Information This is the default domain name that appends to hostnames that are not fully qualied. The no version of this
command removes the conguration.
Example
OS10(conf-dhcp-Dell)# domain-name dell.com
Supported Releases 10.2.0E or later
hardware-address
Congures the client hardware address for manual congurations.
Syntax
hardware-address nn:nn:nn:nn:nn:nn
Parameters nn:nn:nn:nn:nn:nn — Enter the 48-bit hardware address.
Default Not congured
Command Mode DHCP-POOL
Usage Information The client hardware address is the MAC address of the client machine to which to lease a static IP address from.
Example
OS10(conf-dhcp-static)# hardware-address 00:01:e8:8c:4d:0a
Supported Releases 10.2.0E or later
host
Assigns a host to a single IPv4 or IPv6 address pool for manual congurations.
Syntax
host A.B.C.D/A::B
Parameters A.B.C.D/A::B — Enter the host IP address in A.B.C.D or A::B format.
Default Not congured
454 System management