Users Guide
OS9 environment commands
You can congure commands in an OS9 environment by using the feature config-os9-style command. The current release
supports VLAN tagging and port-channel grouping commands.
• VLAN Interface mode
– tagged
– no tagged
– untagged
– no untagged
• Port-channel Interface mode:
– channel-member
– no channel-member
• Enable the feature to congure commands in an OS9 environment in CONFIGURATION mode.
OS10(config)# feature config-os9-style
OS10(config)# exit
OS10# show running-configuration compressed
interface breakout 1/1/28 map 10g-4x
feature config-os9-style
• Once this feature is enabled, you cannot use the OS10 format of commands in the new session.
OS10(config)# interface vlan 11
OS10(conf-if-vl-11)# tagged ethernet 1/1/15
OS10(conf-if-vl-11)# show configuration
!
interface vlan11
no shutdown
tagged ethernet 1/1/15
Common commands
alias
Creates a command alias.
Syntax
alias alias-name alias-value
Parameters
• alias-name — Enter the name of the alias (up to 20 characters).
• alias-value — Enter the command to be executed within double quotes (1 to 9 or *). Enter the $ followed
by either numbers ranging from
1 to 9 or with an asterisk (*) and enter the parameters while executing the
commands using the alias. Use asterisk (*) to represent any number of parameters.
Default Not congured
Command Mode
EXEC
CONFIGURATION
46 Getting Started