Users Guide

Supported Releases 10.2.0E or later
commit
Commits changes in the candidate conguration to the running conguration.
Syntax
commit
Parameters None
Default Not congured
Command Mode EXEC
Usage Information Use this command to save changes to the running conguration. Use the do commit command to save changes
in CONFIGURATION mode.
Example
OS10# commit
Example
(conguration)
OS10(config)# do commit
Supported Releases 10.2.0E or later
congure
Enters CONFIGURATION mode from EXEC mode.
Syntax
configure {terminal}
Parameters terminal — Enters CONFIGURATION mode from EXEC mode.
Default Not congured
Command Mode EXEC
Usage Information Enter conf t for auto-completion.
Example
OS10# configure terminal
OS10(config)#
Supported Releases 10.2.0E or later
copy
Copies the current running conguration to the startup conguration and transfers les between an OS10 switch and a remote device.
Syntax
copy [running-configuration startup-configuration | config://filepath |
coredump://filepath | ftp://filepath | home://filepath | scp://filepath |
sftp://filepath | supportbundle://filepath | tftp://filepath | usb://filepath]
Parameters
• running-configuration startup-configuration — (Optional) Copy the current running
conguration le to the startup conguration le.
• config://filepath — (Optional) Copy from conguration directory.
• coredump://filepath — (Optional) Copy from the coredump directory.
Getting Started 49