Users Guide
Command Mode EXEC
Usage Information None
Example
OS10# show vlt 1
Domain ID : 1
Unit ID : 1
Role : primary
Version : 1.0
Local System MAC address : 90:b1:1c:f4:99:93
VLT MAC address : 90:b1:1c:f4:99:93
IP address : fda5:74c8:b79e:1::1
Delay-Restore timer : 1000 seconds
Peer-Routing : Disabled
Peer-Routing-Timeout timer : 0 seconds
VLTi Link Status
port-channel1000 : up
VLT Peer Unit ID System MAC Address Status IP Address Version
------------------------------------------------------------------------
2 90:b1:1c:f4:bc:0a up fda5:74c8:b79e:1::2 1.0
Supported Releases 10.2.0E or later
show vlt backup-link
Displays the details of heartbeat status.
Syntax
show vlt domain-id backup-link
Parameters domain-id — Enter the VLT domain ID.
Default Not congured
Command Mode EXEC
Usage Information None
Example
OS10# show vlt 1 backup-link
VLT Backup link
-------------------------------------------
Destination : 10.16.128.25
Peer Heartbeat Status : Up
Supported Releases 10.3.1E or later
show vlt mac-inconsistency
Displays inconsistencies in dynamic MAC addresses learnt between VLT peers across spanned-vlans.
Syntax
show vlt mac-inconsistency
Parameters None
Default Not congured
Command Mode EXEC
Usage Information Use this command to check mismatch of MAC address table entries between VLT peers. To verify VLT
conguration mismatch issues on peer switches, use the show vlt domain-name mismatch command.
638 Virtual link trunking