Users Guide

Usage
Information
The no version of this command removes the extended community list.
Example
OS10(config)# ip extcommunity-list standard STD_LIST deny 4byteas-
generic transitive 1.65534:40
Supported
Release
10.3.0E or later
ip extcommunity-list standard permit
Creates an extended community list for BGP to permit access.
Syntax
ip extcommunity-list standard name permit {4byteas-generic | rt | soo}
Parameters
● name — Enter the name of the community list used to identify one or more permit groups of
extended communities.
● rt — Enter the route target.
● soo — Enter the route origin or site-of-origin.
Defaults Not configured
Command Mode CONFIGURATION
Usage
Information
The no version of this command removes the extended community list.
Example
OS10(config)# ip extcommunity-list standard STD_LIST permit 4byteas-
generic transitive 1.65412:60
Supported
Release
10.3.0E or later
ip prefix-list description
Configures a description of an IP prefix list.
Syntax
ip prefix-list name description
Parameters
● name — Enter the name of the prefix list.
● description — Enter the description for the named prefix list.
Defaults Not configured
Command Mode CONFIGURATION
Usage
Information
The no version of this command removes the specified prefix list.
Example
OS10(config)# ip prefix-list TEST description TEST_LIST
Supported
Release
10.3.0E or later
ip prefix-list deny
Creates a prefix list to deny route filtering from a specified network address.
Syntax
ip prefix-list name deny [A.B.C.D/x [ge | le]] prefix-len
Parameters
● name — Enter the name of the prefix list.
1132 Access Control Lists