API Guide

● [e-mail]
● [e-mail]
● [e-mail]
Command Mode CONFIGURATION
Usage
Information
Supported on the MX9116n and MX5108n switches in Full Switch mode starting in release 10.4.0E(R3S).
Also supported in SmartFabric mode starting in release 10.5.0.1.
The no version of this command removes the configuration.
Example
OS10(config)# ip ssh server mac hmac-md5 hmac-md5-96 hmac-ripemd160
Supported
Releases
10.3.0E or later
ip ssh server password-authentication
Enables password authentication in the SSH server.
Syntax
ip ssh server password-authentication
Parameters None
Default Enabled
Command Mode CONFIGURATION
Usage
Information
Supported on the MX9116n and MX5108n switches in Full Switch mode starting in release 10.4.0E(R3S).
Also supported in SmartFabric mode starting in release 10.5.0.1.
The no version of this command disables the password authentication.
Example
OS10(config)# ip ssh server password-authentication
Supported
Releases
10.3.0E or later
ip ssh server port
Configures the SSH server listening port.
Syntax
ip ssh server port port-number
Parameters port-number — Enter the listening port number, from 1 to 65535.
Default 22
Command Mode CONFIGURATION
Usage
Information
TSupported on the MX9116n and MX5108n switches in Full Switch mode starting in release 10.4.0E(R3S).
Also supported in SmartFabric mode starting in release 10.5.0.1.
The no version of this command removes the configuration.
Example
OS10(config)# ip ssh server port 255
Supported
Releases
10.3.0E or later
Security 1043