API Guide

OS10 (config-openflow-switch)# rate-limit packet_in 1000 burst 300
OS10 (config-openflow-switch)#
Supported
Releases
10.4.1.0 or later
show openflow
Displays general OpenFlow switch and the logical switch instance information.
Syntax
show openflow
Parameters None
Default None
Command Mode EXEC
Usage
Information
None
Example
OS10# show openflow
Manufacturer : DELL
Hardware Description :
Software Description : Dell Networking OS10-Premium, Dell
Networking Application Software Version: 10.4.9999EX
Serial Number :
Capabilities : port, table, flow
Switch mode : openflow-only
Match fields :
Layer-1 : in-port
Layer-2 : eth-src, eth-dst, eth-type, vlan-id, vlan-pcp
Layer-3 : ipv4-src, ipv4-dst, ip-protocol, ip-dscp, ip-ecn
Layer-4 : tcp-src, tcp-dst, udp-src, udp-dst, icmpv4-type, icmpv4-
code
Instructions : apply-actions, write-actions
Actions : output, set-field
Set field actions : eth-src, eth-dst, vlan-id, vlan-pcp, ip-
dscp
TLS parameters :
certificate identifying trustworthy controller : /config/etc/opt/
dell/os10/openflow/cacert.pem
certificate identifying trustworthy switch : /config/etc/opt/
dell/os10/openflow/sc-cert.pem
private key : /config/etc/opt/
dell/os10/openflow/sc-privkey.pem
Supported
Releases
10.4.1.0 or later
show openflow flows
Displays OpenFlow flows for a specific logical switch instance.
Syntax
show openflow switch logical-switch-name flows
Parameters logical-switch-name—Enter the logical switch instance name to view flow information.
Default None
Command Mode EXEC
Usage
Information
None
1106 OpenFlow