API Guide

Default Not configured
Command Mode CLASS-MAP
Usage
Information
You cannot enter two match statements with the same filter-type. If you enter two match statements
with the same filter-type, the second statement overwrites the first statement.
Example
OS10(conf-cmap-qos)# match not ipv6 precedence 3
Supported
Releases
10.2.0E or later
match queue
Configures a match criteria for a queue.
Syntax
match queue queue-number
Parameters queue-number — Enter a queue number, from 0 to 7.
Default Not configured
Command Mode CLASS-MAP
Usage
Information
You can configure this command only when the class-map type is queuing. You cannot enter two match
statements with the same filter-type. If you enter two match statements with the same filter-type, the
second statement overwrites the first statement.
Example
OS10(conf-cmap-queuing)# match queue 1
Supported
Releases
10.2.0E or later
match vlan
Configures a match criteria based on the VLAN ID number.
Syntax
match vlan vlan-id
Parameters vlan-id — Enter a VLAN ID number, from 1 to 4093.
Default Not configured
Command Mode CLASS-MAP
Usage
Information
You cannot enter two match statements with the same filter-type. If you enter two match statements
with the same filter-type, the second statement overwrites the first statement.
Example
OS10(conf-cmap-qos)# match vlan 100
Supported
Releases
10.2.0E or later
mtu
Calculates the buffer size allocation for matched flows.
Syntax
mtu size
Parameters size — Enter the size of the buffer (1500 to 9216).
Default 9216
Command Mode POLICY-MAP-CLASS-MAP
1236 Quality of service