API Guide

Example
(Details)
OS10# show interface ethernet 1/1/14 priority-flow-control details
ethernet1/1/14
Admin Mode: On
Operstatus: On
PFC Priorites: 0,4,7
Total Rx PFC Frames: 300
Total Tx PFC Frames: 200
Cos Rx Tx
-----------------------
0 0 0
1 0 0
2 0 0
3 300 200
4 0 0
5 0 0
6 0 0
7 0 0
Supported
Releases
10.3.0E or later
show qos interface
Displays the QoS configuration applied to a specific interface.
Syntax
show qos interface ethernet node/slot/port[:subport]
Parameters node/slot/port[:subport] — Enter the Ethernet interface information.
Default Not configured
Command Mode EXEC
Usage
Information
None
Example
OS10# show qos interface ethernet 1/1/10
Ethernet 1/1/10
unknown-unicast-storm-control : 100 pps
multicast-storm-control : 200 pps
broadcast-storm-control : Disabled
flow-control-rx: Enabled
flow-control-tx: Disabled
Service-policy (Input)(qos): p1
Supported
Releases
10.2.0E or later
show policy-map
Displays information on all existing policy-maps.
Syntax
show policy-map type {control-plane | qos | queuing | network-qos}]
[policy-map-name]
Parameters
● type — Enter the policy-map type — qos, queuing, or control-plane.
● qos — Displays all policy-maps of qos type.
● queuing — Displays all policy-maps configured of queuing type.
● network-qos — Displays all policy-maps configured of network-qos type.
● control-plane — Displays all policy-maps of control-plane type.
● policy-map-name — Displays the QoS policy-map name details.
Default Not configured
1254 Quality of service