API Guide

show qos port-map details
Displays port to port pipe and MMU mapping.
Syntax
show qos port-map details [interface interface-type]
Parameters interface interface-type — (Optional) Enter the keyword interface and the interface type.
Default Not configured
Command Mode EXEC
Usage
Information
On the Z9100–ON, Z9264F–ON, and MX9116n platforms, interfaces are shared across port pipes and port
pipes are shared across Memory Management Units (MMUs). As interfaces span port pipes, Dell EMC
Networking recommends using interfaces from same port pipes for both ingress and egress for optimal
performance. To find the port to port-pipe and MMU mapping, use the show qos port-map details
command.
Example
Z9100–ON switch:
OS10# show qos port-map details
---------------------------------------------------------------------------
Interface Port Pipe Ingress MMU Egress MMU Oper Status
---------------------------------------------------------------------------
Eth 1/1/1 1 2, 3 0, 2 up
Eth 1/1/2 1 2, 3 0, 2 up
Eth 1/1/3 1 2, 3 0, 2 up
Eth 1/1/4 1 2, 3 0, 2 up
Eth 1/1/5 2 2, 3 1, 3 up
Eth 1/1/6 2 2, 3 1, 3 up
Eth 1/1/7 2 2, 3 1, 3 up
Eth 1/1/8 2 2, 3 1, 3 up
Eth 1/1/9 1 2, 3 0, 2 up
Eth 1/1/10 1 2, 3 0, 2 up
Eth 1/1/11 1 2, 3 0, 2 up
Eth 1/1/12 1 2, 3 0, 2 up
Eth 1/1/13 2 2, 3 1, 3 down
Eth 1/1/14 2 2, 3 1, 3 down
Eth 1/1/15 2 2, 3 1, 3 down
Eth 1/1/16 2 2, 3 1, 3 down
Eth 1/1/17 3 0, 1 1, 3 down
Eth 1/1/18 3 0, 1 1, 3 down
Eth 1/1/19 3 0, 1 1, 3 down
Eth 1/1/20 3 0, 1 1, 3 down
Eth 1/1/21 0 0, 1 0, 2 down
Eth 1/1/22 0 0, 1 0, 2 down
1262
Quality of service