API Guide

Green Drop 0
0
Yellow Drop 0
0
Red Drop 0
0
ECN marked count 0 0
Example (queue)
OS10# show queuing statistics interface ethernet 1/1/1 queue 3
Interface ethernet1/1/1
Queue Packets Bytes Dropped-
Packets Dropped-Bytes
3 0 0
0 0
Supported
Releases
10.2.0E or later
system qos
Enters SYSTEM-QOS mode to configure system-level QoS configurations.
Syntax
system qos
Parameters None
Default Not configured
Command Mode CONFIGURATION
Usage
Information
None
Example
OS10(config)# system qos
OS10(config-sys-qos)#
Supported
Releases
10.2.0E or later
trust dot1p-map
Creates a user-defined trust map for dot1p flows.
Syntax
trust dot1p-map map-name
Parameters map-name — Enter the name of the dot1p trust map. A maximum of 32 characters.
Default Not configured
Command Mode CONFIGURATION
Usage
Information
If you enable trust, traffic obeys the dot1p map. default-dot1p-trust is a reserved trust-map name.
The no version of this command returns the value to the default.
Example
OS10(config)# trust dot1p-map map1
OS10(config-tmap-dot1p-map)# qos-group 4 dot1p 5
Supported
Releases
10.3.0E or later
Quality of service 1271