API Guide

Command Mode INTERFACE
Usage
Information
In Auto mode, a DCBX-enabled port detects an incompatible DCBX version on a peer device port and
automatically reconfigures a compatible version on the local port. The no version of this command
disables the DCBX version.
Example
OS10(conf-if-eth1/1/2)# dcbx version cee
Supported
Releases
10.3.0E or later
lldp tlv-select dcbxp
Enables and disables DCBX on a port interface.
Syntax
lldp tlv-select dcbxp
Parameters None
Default Enabled interface level; disabled global level
Command Mode INTERFACE
Usage
Information
DCBX must be enabled at both the global and interface levels. Enable DCBX globally using the dcbx
enable command to activate the exchange of DCBX TLV messages with PFC, ETS, and iSCSI
configurations. To configure the TLVs advertised by a DCBX-enabled port, change the DCBX version, or
disable DCBX on an interface, use DCBX interface-level commands. The no version of this command
disables DCBX on an interface.
Example
OS10(conf-if-eth1/1/1)# lldp tlv-select dcbxp
Supported
Releases
10.3.0E or later
show lldp dcbx
Displays the DCBX configuration and PFC or ETS TLV status on an interface.
Syntax
show lldp dcbx {detail | ets detail | pfc detail | interface ethernet node/
slot/port[:subport] [ets detail | pfc detail]
Parameters
● detail — Display DCBX configuration information of all the interfaces in detail.
● interface ethernet node/slot/port[:subport] — Enter interface information.
● ets detail — Display the ETS TLV status and operation with DCBX peers.
● pfc detail — Display the PFC TLV status and operation with DCBX peers.
Default Not configured
Command Mode EXEC
Usage
Information
Enable DCBX before using this command. DCBX advertises all TLVs — PFC, ETS Recommendation, ETS
Configuration, DCBXP, and basic TLVs by default.
NOTE: In the command output, the Is configuration source parameter always displays
False. Configuration source is the type of port role that is not supported.
Example (DCBX
detail)
OS10# show lldp dcbx detail | no-more
E-ETS Configuration TLV enabled e-ETS Configuration TLV disabled
R-ETS Recommendation TLV enabled r-ETS Recommendation TLV disabled
P-PFC Configuration TLV enabled p-PFC Configuration TLV disabled
F-Application priority for FCOE f-Application Priority for FCOE
enabled disabled
I-Application priority for iSCSI i-Application Priority for iSCSI
Converged data center services 1341