API Guide

-----------------------------------
bgp 300000
bgp-peer 0
buffer 15000
device 300000
environment 300000
interface 180000
lag 0
system 300000
Encoding : gpb
Transport : grpc TLS : disabled
Source Interface : ethernet1/1/1
Active : true
Reason : Connection summary: One or more active connections
The connection 10.11.56.204:40001 is in connected state
Subscription profile with openconfig model sensor group
=======================================================
OS10# show telemetry subscription-profile
Telemetry Status : enabled
-- Telemetry Subscription Profile --
Name : subscription-2
Destination Groups(s) : dest2
Sensor-group Sample-interval
-----------------------------------
oc-bfd 15000
oc-bgp 15000
oc-buffer 15000
oc-device 15000
oc-environment 15000
oc-interface 15000
oc-lacp 15000
oc-lag 0
oc-lldp 15000
oc-stp 15000
oc-system 15000
oc-vendor-ufd 15000
oc-vendor-vxlan 15000
oc-vlan 15000
oc-vrrp 15000
Encoding : gpb
Transport : grpc TLS : disabled
Source Interface : ethernet1/1/1
Active : true
Reason : Connection summary: One or more active connections
The connection 10.11.56.204:40002 is in connected state
Supported
releases
10.4.3.0 or later
Example: Configure streaming telemetry
OS10(config)# telemetry
OS10(conf-telemetry)# enable
OS10(conf-telemetry)# destination-group dest1
OS10(conf-telemetry-dg-dest1)# destination 10.11.56.204 40001
OS10(conf-telemetry-dg-dest1)# exit
OS10(conf-telemetry)# subscription-profile subscription-1
OS10(conf-telemetry-sp-subscription-1)# sensor-group bgp 300000
OS10(conf-telemetry-sp-subscription-1)# sensor-group bgp-peer 0
Telemetry
1383