API Guide

To display values for the type and name parameters in the curl command, display the XML structure of the interface vlan
20 configuration command:
OS10(config)# do debug cli netconf
OS10(config)# interface vlan 10
Request:
<?xml version="1.0" encoding="UTF-8"?>
<rpc xmlns="urn:ietf:params:xml:ns:netconf:base:1.0">
<edit-config>
<target>
<candidate/>
</target>
<default-operation>merge</default-operation>
<error-option>stop-on-error</error-option>
<test-option>set</test-option>
<config>
<interfaces xmlns="urn:ietf:params:xml:ns:yang:ietf-interfaces"
xmlns:ianaift="urn:ietf:params:xml:ns:yang:iana-if-type" xmlns:dell-if="http://
www.dellemc.com/networking/os10/dell-interface" xmlns:dell-eth="http://www.dellemc.com/
networking/os10/dell-ethernet" xmlns:dell-lag="http://www.dellemc.com/networking/os10/
dell-lag">
<interface>
<type>ianaift:l2vlan</type>
<name>vlan10</name>
</interface>
</interfaces>
</config>
</edit-config>
</rpc>
Reply:
<?xml version="1.0" encoding="UTF-8"?>
<rpc-reply xmlns="urn:ietf:params:xml:ns:netconf:base:1.0" message-id="10">
<ok/>
</rpc-reply>
OS10(config)# do no debug cli netconf
RESTCONF API Examples
Some common RESTCONF API operations include configuring system hostname, and interfaces such as loopback interface. The
examples in this section use curl commands to send the HTTPS request.
System
Configure system hostname
RESTCONF
endpoint
/restconf/data/dell-system:system/hostname
JSON content
{
"hostname":"MyHost"
}
Parameters
● hostname string —Enter the hostname of the system. The default is OS10.
Example
curl -X PATCH -k -u admin:admin -H "Content-Type: application/json"
https://10.11.86.113/restconf/data/dell-system:system/hostname
-d '{"hostname":"MyHost"}'
1390 RESTCONF API